New cover strip for profiled guide rails from Schaeffler reduces mounting times by up to 90 percent

The new slide-in steel cover strip: Flexible enough for easy mounting while maintaining a high load carrying capacity when mounted.

• Reusable slide-in cover strip shortens cycle times when mounting multi-axis systems

• The axis’s fixing screws remain accessible and can be perfectly adjusted as often as necessary with the carriage still mounted

• The entire length of the guide rail can be used thanks to a countersunk screw joint at the end of the guide rail

With their innovative new cover strip for profiled guide rails, Schaeffler’s linear technology specialists will be presenting a very simple and practical mounting solution: The ADE steel cover strip is slid into a fitted groove in the guide rail and fixed in place using a screw. Mounting times are thus reduced by up to 90 percent in comparison with previous solutions. This means that, in the mechanical engineering sector, cycle times in the assembly of multi-axis systems can be drastically reduced. The new cover strip is currently available for RUE 35, 45, and 55 linear recirculating roller bearing and guideway assemblies, with further variants set to follow. It is also reusable and offers decisive advantages in both initial operation and maintenance: Unlike other solutions, the ADE cover strip does not have to be mounted in the profiled guide rail during the machine construction process. This can also be done subsequently. All of the axis’s fixing screws remain accessible and can be perfectly adjusted as often as necessary with the carriage still mounted. The carriages’ seal lips do not touch the counterbores in the profiled guide rail and damage to the seal is eliminated. Once the guide rails have been mounted and the geometry check has been completed, the cover strips are simply inserted into the profiled guide rails and under the seal lips of the guide carriages. It is fixed into place in the groove using a countersunk screw joint at the end of the guide rail. This means that the entire length of the guide rail can be used.

In the case of single-piece guide rails, the customized cover strip is delivered in the packaging together with the guide rail and carriage; for multi-piece guide rails, the cover strip is rolled into a coil and packaged together with the carriages and guide rail sections.